Jump to content

PrettyCranium

Yami Usagi

Baldylox

otakusan

Poofiemus

iomi

Baldylox

archangeli

Juu Yuki

Uriko

Singer Yuna

Baldylox

battrastard

Migon

Sign in to follow this  
Tiriaq

Any pictures of Dollfie feet detached (all)

Recommended Posts

Tiriaq

I'm trying to design some high-heel feet for the Dollfie Dream III
But I'm not brave enough to start pulling it completely out of the balljoint part. Has anyone a picture of the foot fully extracted what kind of hook they're using. I could try design the hull around the hook but I need to know anyway to keep the mobility of the joints.

I'm completely new to 3D so I guess it will take quite a while before and if I will even succeed. Right now I'm doing a color test because the regular stuff was too pink.

 

 

Share this post


Link to post
Share on other sites
Tiriaq

That is nice! Only I need to see that hook as well. So far I've drawn a cylinder and two spheres. Now I'm trying to figure out how to cut the sides of the hook and a valley into that other sphere where the hook goes into. 

I wish I remember the wrists better. It's some kind of tiny cylinder in there with rounded edges and that hook around it. But I don't know the angle that thing has.
A pretty poor movement if you ask me. The foot only goes one way and not very far.

Anyway, I hope to see more but this is nice. I didn't expect there would be a part inside the foot. Since on my resinprinter I will just print the ball onto the foot. In the worst case if I cannot design then I will try hot water and bend the foot if that works to keep the shape natural and on both sides.

 

Thnx any help on info is appreciated!

Share this post


Link to post
Share on other sites
Subaru
Posted (edited)
Spoiler

Image result for your toes hand them over

Anyways, here's a blog that shows the F3 foot parts, unscrewed and disassembled. The parts are little different, but I figured it might still be useful or something. The post is in Japanese, but the images are pretty clear on what to expect.

https://ameblo.jp/kotarovision/entry-12418001652.html

Edited by Subaru
  • Thanks 1

Share this post


Link to post
Share on other sites
Tiriaq
6 minutes ago, Subaru said:
  Reveal hidden contents

Image result for your toes hand them over

Anyways, here's a blog that shows the F3 foot parts, unscrewed and disassembled. The post is in Japanese, but the images are pretty clear on what to expect.

https://ameblo.jp/kotarovision/entry-12418001652.html

Wow... magic. You have the stuff, only the F3 is much more complicated than I thought. But I will try to keep holding on. For now I am starting to download other STL balljoints and see if I can merge them with the foot and the hollowed out cylinder. I get very nervous but I must focus lol. 

I just need to learn this 3D designing stuff, looks so much harder than Photoshop.

Thank you so much!

Share this post


Link to post
Share on other sites
Subaru
Posted (edited)

Here's another alternative, a maker of third party DD option parts sells heeled foot parts. 

http://item.taobao.com/item.htm?spm=a1z10.1.w4004-1268090393.4.KWkrN7&id=13037390170

http://www.wersaze.com/

You will need to use a shopping service to get them though. 



You can find some pics on the forum here: 

 

And Archangeli's video here: 

-----

I took another look at the blog and they have pictures of the DDIII frame: 
https://ameblo.jp/kotarovision/entry-12356873601.html

Edited by Subaru

Share this post


Link to post
Share on other sites
Tiriaq
23 minutes ago, Subaru said:

Here's another alternative, a maker of third party DD option parts sells heeled foot parts. 

http://item.taobao.com/item.htm?spm=a1z10.1.w4004-1268090393.4.KWkrN7&id=13037390170

http://www.wersaze.com/

You will need to use a shopping service to get them though. 

And Archangeli's video here: 

I took another look at the blog and they have pictures of the DDIII frame: 
https://ameblo.jp/kotarovision/entry-12356873601.html

 

Ah yeah I remember those, they are the same seller. Just by the time I sent money I didn't hear anything so I went to investigate and he said the mold was broken. So I got refund.
But now that I have my own printer I want to try first myself.

I know that Youtuber as well, nice find. I will scroll through again if I see something. I can already see the wrist hook over there. Though they did not use that in the F3 that I have. (I have both the previous and the new F3 skeleton)

Great help. I will post pics if I manage to make something. I've got tons of props now  😄  but now comes all the priming and painting aarghhh

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...

Important Information

I have read and agree to the Privacy Policy.