1/6 scale vinyl TinyFox Dolls!

7 hours ago, RozenGermain said:

I know right? The earlier ones tend to vary in terms of if they are or aren't given reruns! I was lucky I got my hand on Lyney tbh! Lilith was one of my favorites and I was resigned to not getting him until somehow Kikagoods had some leftovers of him!

I have been hunting everywhere for 1/4 Vivienne or Anna and they are just nowhere to be found.  Fingers crossed for reruns!

3 hours ago, Bonniec83 said:

I have been hunting everywhere for 1/4 Vivienne or Anna and they are just nowhere to be found.  Fingers crossed for reruns!

There’s been some speculation that the older dolls will be remade on the new 1/4 bodies based on a tweet by LaPeonier recently.

On 5/1/2025 at 4:28 AM, ragnamuffin said:

There’s been some speculation that the older dolls will be remade on the new 1/4 bodies based on a tweet by LaPeonier recently.

Man, I want a 1/4 scale TF doll so bad!

Please help 🙏 

My Cherrie was quite floppy, so I tried taking her apart to tighten her joints. When I pulled her bust off the torso, it sounded like she snapped somewhere and now she’s even floppier than before. It seems like something’s broken, but there were no loose parts or broken bits that I could see, so I’m not sure what happened…

If anyone has done this before and knows how to fix it, please please please let me know!!!

On 5/4/2025 at 2:27 AM, ragnamuffin said:

Please help 🙏 

My Cherrie was quite floppy, so I tried taking her apart to tighten her joints. When I pulled her bust off the torso, it sounded like she snapped somewhere and now she’s even floppier than before. It seems like something’s broken, but there were no loose parts or broken bits that I could see, so I’m not sure what happened…

If anyone has done this before and knows how to fix it, please please please let me know!!!

I fixed the problem and detailed everything here if anyone's interested.

Hi everyone. I haven't been here for so long. Just popping in to tell you that the discount code I shared for Kika Goods last year is no longer in use. 

In other news I just pre-ordered Tiny Mouse Chef  Mousse. So excited to get her later in the year! 

Has anybody done stain removal on the newer 1/6 bodies without the coating? I dressed mine in something red and now she has very faint red marks on her arms. I know that the smooth coated older bodies will blister from dream rescue/most stain treatment, is that the case with the uncoated body too?

20 hours ago, cheerycherry said:

Has anybody done stain removal on the newer 1/6 bodies without the coating? I dressed mine in something red and now she has very faint red marks on her arms. I know that the smooth coated older bodies will blister from dream rescue/most stain treatment, is that the case with the uncoated body too?

So apparently there is a cream that works on both the old soft touch coating body and the newer ones too. It’s called Doll Shimi Care (ドールシミケア) by the company Star.

Idk how difficult it is to get this cream from outside Japan, but I know Azone stocks it and there should be a store on Base/Pay ID that sells it.

Otherwise, the new 1/6 TinyFoxes come with melamine sponges to buff out stains, so you could try to get it out that way.

1 hour ago, ragnamuffin said:

So apparently there is a cream that works on both the old soft touch coating body and the newer ones too. It’s called Doll Shimi Care (ドールシミケア) by the company Star.

Idk how difficult it is to get this cream from outside Japan, but I know Azone stocks it and there should be a store on Base/Pay ID that sells it.

Otherwise, the new 1/6 TinyFoxes come with melamine sponges to buff out stains, so you could try to get it out that way.

Amazing, thank you! Hopefully I can just buy it with a proxy.

hii! Does anyone know if MDD hands will fit a tinyfox 1/4 bod? i know the 1/6 wrist has a little notch so its kinda hard to apply 3rd party hands so is it the same for the 1/4?

5 hours ago, yuiforia said:

hii! Does anyone know if MDD hands will fit a tinyfox 1/4 bod? i know the 1/6 wrist has a little notch so its kinda hard to apply 3rd party hands so is it the same for the 1/4?

I don't have the old 1/4 body so I can't weigh in on that, but they definitely will not fit the 1/4 Macoco body. The hand pegs are completely incompatible.

Do tinyfox 1/6 cuties -- wear 6-7 inch wigs? or 7-8 inch?

The head circumference is 17.5cm right? 

Edited July 7, 2025 by AliceDoll

3 hours ago, AliceDoll said:

Do tinyfox 1/6 cuties -- wear 6-7 inch wigs? or 7-8 inch?

The head circumference is 17.5cm right? 

They can wear both. They come with 6-7 inch wigs and those are probably the most appropriate for their size length-wise, but sometimes the headcap is too small and won’t fit over their little noggins. 7-8 inch wigs fit perfectly but sometimes look a little oversized, especially longer ones. I use a mix of both.

New tiny fox girl/ fullset named Flora, her faceup and outfit is very cute. She gives me witchy magical girl vibes with her outfit, definitely making my wallet sweat. 

She is currently up for pre-order now on their official store and probably some dealers as well.

Edited July 17, 2025 by AwkwardMango

On Jane's Dolland she has listed up some flawed tinyfox heads for $5 each. I just nabbed one, but there are 7 lefts as of right now.

It's been a long time since I've posted on here but lots has happened since last year! For one, Lychee came home todayyyyy~     ╰(*´︶`*)╯

I've got a different wig, eyes, tail, and ears coming sooooooon hehe~

Interesting development, looks like the first wave of their new 1/4 size bodies are finally going to start shipping out! They posted a little posing demonstration and it looks pretty comparable to MDD.

I like the idea of Tinyfox branching out into more "standard" vinyl dolls but I'll definitely be on the lookout for reviews before I consider buying one...

oh yay! I miss their 1/4 dolls ngl
I've been able to resist their 1/6 stuff but I might be in trouble now 😂

They shared the alleged first (?) Peko release at a convention recently. She's a collab with someone.

My tinyfox head came in! It's so darling and cute, I really love the sleepy eyes. Since this one was a flawed head, the number on the back has been removed but I believe it is a C-05, if not someone correct me. Do any of you have examples of face ups using this model? I'd love to see them.

Also compared to imomo 1/6 heads they are slightly smaller, not a problem for me but here is an example side by side!

So I ordered the 1/6 Mouse Chef Mousse a couple months ago and she is on her way!  So excited to finally have one of these cute dolls!

 

I compared her body measurements to Barbie, and they are very close in some measurements, but not in others.  I may be able to modify some Barbie patterns for her.

Mousse has arrived!  I posted pictures in New Arrivals.   She is definitely a bit thinner than other "YoSD" dolls.  Time to experiment!

A new tinyfox named Violet is up for pre-order! I'm so tempted to get her but gotta save for a different doll sadly.

 

3 hours ago, AwkwardMango said:

A new tinyfox named Violet is up for pre-order!

To add on to this, preorders close on December 1, so anyone who wants her needs to act fast.

Another thing to note—she uses the C-21 head (same as Flurry and Meira), which is a bit smaller than their other heads. Ymmv, but this size difference is really noticeable to me and I think it looks a little weird on the stock Angel body, so that’s something to be aware of if this kind of thing bothers you.

I ordered my first 1/6 Tiny Fox! It’s the “Little Frog”. There was only one in stock at Jane’s Doll Land and now she’ll soon be on her way home. She’s going to be very, very spoiled!