Imomodoll 1/4 Vinyl Dolls??

My imomo tiamat came in this week! Gave her a faceup and some cute clothes. Coming from resin BJDs, I too have fixed the head wobble with the help of hot glue.

I want to work on the rest of her body as well. 2.0 poses OK and can stand on its own with little effort, but I really want to do something about the large knee gaps when she sits, there's still a bunch of that looseness I want to work out. Does anyone have tips for that knee gap?

3 hours ago, MAKYUU said:

I want to work on the rest of her body as well. 2.0 poses OK and can stand on its own with little effort, but I really want to do something about the large knee gaps when she sits, there's still a bunch of that looseness I want to work out. Does anyone have tips for that knee gap?

Personally I've been stuffing the thighs with pieces of tissue, specifically the back of the thigh behind the skeleton. I press it in there firmly so it can support the rod and keep it from wiggling around inside the thigh. I've mostly done it so the knees aren't so "floaty" when the doll is standing, but maybe it will help with the sitting issue too?

15 hours ago, Tierparkzone said:

My Milly is an Imomo head on MDD 2.0. - If you use between 5 and 7 silicon rings (the ones that come with the MDD body) to hold down the Imomo head, this works pretty well, even though the neck peg itself is pretty thin. Only annoyance is that you have to remove them whenever you need to remove the head from the body.

https://www.dolldreaming.com/topic/17243-tierparkzones-doll-photos/?do=findComment&comment=312736

 

For reference, Milly's head is a Tiamat (in case neck hole size might differ between sculpts - haven't handled many other Imomo heads).

Oh your Milly looks great! Is the head wobbly at all with the MDD silicone rings? My biggest annoyance with the Imomo body was that even with the silicone neck donut, the winged screws, and putty jammed in the back of the head gap and around the peg, the head was STILL wobbly. I would happily trade having to remove all the silicone rings if it means the head is stable!

7 minutes ago, Roserolls said:

Oh your Milly looks great! Is the head wobbly at all with the MDD silicone rings?

I had the wobbliness in the beginning, when I only used about two silicone rings. As long as the lowermost ring stays down and clamps the head between itself and the neck vinyl, the head is pretty stable. The extra rings (I basically used all the ones included with the body) are just there to keep the lowermost ring from sliding up.

 

Rucy Head - "Little Fry Cook" Mayoko

 

 

Rucy Head - "Mayuka Sakuraba" Custom

 

Edited January 15 by Tasuke

Just wanted to share some pics of my finished AP hybrid!
She's a modded Imomodoll Empty head on an AP Muscle body. Very happy with how she turned out!

Hephy by Morgan McPherson, on Flickr

Omg she's gorgeous!

ahh thank you so much! 🙈💗

Here is just her face with the mods and faceup I did:

Edited January 20 by Beansproutmomo

Decided to Shift back to the VOLKS 20mm. TYPE-H "Akane" Eyes for Mayuka. Darker Eyes simply seem to Look Better on her, IMO;

 

Edited Sunday at 11:57 PM by Tasuke

On 1/15/2026 at 3:58 PM, Beansproutmomo said:

Just wanted to share some pics of my finished AP hybrid!
She's a modded Imomodoll Empty head on an AP Muscle body. Very happy with how she turned out!

Hephy by Morgan McPherson, on Flickr

Hi, I plan on doing a similar hybrid with one of my girls. May I ask for details on the head connecting process? I know Imomo heads are set up like Dollfie Dreams, and AP uses the Obitsu method instead...

8 minutes ago, Giallo_Gatta said:

Hi, I plan on doing a similar hybrid with one of my girls. May I ask for details on the head connecting process? I know Imomo heads are set up like Dollfie Dreams, and AP uses the Obitsu method instead...

Hey there sure I can help!! So I have one neck piece I bought from Bonelace that is 3D printed. It's a 2 part screw and base, and you trim the screw piece to the length you need, so it doesn't sit too high on the AP/Obitsu neck.

So here is the original instagram post:
https://www.instagram.com/p/ChIPLd8JFoV/?utm_source=ig_web_copy_link&igsh=NTc4MTIwNjQ2YQ==

I originally bought it when it was available on Shapeways, but it seems they went under and it's not available anymore. Bonelace is unsure (in a comment on that post) where they will load the file now, but maybe you can reach out to them and ask? Tell them I sent you! LOL Maybe they can load it to Cults3D, Thingiverse, or SketchFab? Might be worth asking, since the neck piece is crucial to this hybrid working. I haven't found a substitute otherwise, my apologies. Maybe someone else will have a suggestion? 

For all of my Obitsu/parabox hybrids I've just used this adapter from taobao. It's nothing fancy, but it's easy to install and it works fine in my experience.

Since I last ordered one it looks like they'd designed a new magnetic version that allows you to just yank the head right off. Not sure about that one 😂

Oh wow that is awesome thank you for sharing! I'll have to pick up a few of these to keep on hand. 

Thank you so much, both!