misskale Posted May 2, 2013 When you go to try again shapeways says their polished white plastic is heat safe up to 80C. Share this post Link to post Share on other sites
aiRreyes Posted May 4, 2013 this is amazing! I'll be checking this thread then Home: ~Soleil~ (DD Sendo Erika) ~Lilith~ (DDS Melty) ~Quinzel~ (DDH-07) ~Haruka~ (DD Mio) Share this post Link to post Share on other sites
marisa_doll Posted May 7, 2013 Maybe a compromise: new print that gets airbrushed and used directly instead of casting? Because that head you modeled is too cute to not be used by at least one person. Had a think and this is probably the better way to go for me. Money-wise, making a mold, resin copy, then another mold is probably going to cost a bomb now that I know how much silicone I actually need. So painting it seems to be best. Haven't the faintest idea what paint I would use though. Probably acrylic? Probably tamiya? I was thinking maybe I'd used the color matching service at the local Homebase (they scan the color with a computer and mix a paint electronically to match it). They can mix the paints in vinyl matte, which looks like it'll work with the 3d print. this is amazing! I'll be checking this thread then Thanks! My SQ Hibiki I am putting up for adoption a SQ-Lab Ren head on flickr. Contact me for more details! Share this post Link to post Share on other sites
SisterKyoya Posted May 7, 2013 Maybe a compromise: new print that gets airbrushed and used directly instead of casting? Because that head you modeled is too cute to not be used by at least one person. Had a think and this is probably the better way to go for me. Money-wise, making a mold, resin copy, then another mold is probably going to cost a bomb now that I know how much silicone I actually need. I was curious why you didn't originally use the printed head directly before. I kinda wondering if the quality wasn't quite what it needed to be, or it was too rough and couldn't be sanded down well, or some other issue. I'm still really interested to see how all this turns out. ~Sister Kyoya Forum Blog: Badger Pocket Tales (Family story from the beginning) | { Old Family story reboot: Start Here! } Follow me on Twitter, Flickr & Instagram Share this post Link to post Share on other sites
marisa_doll Posted May 7, 2013 Maybe a compromise: new print that gets airbrushed and used directly instead of casting? Because that head you modeled is too cute to not be used by at least one person. Had a think and this is probably the better way to go for me. Money-wise, making a mold, resin copy, then another mold is probably going to cost a bomb now that I know how much silicone I actually need. I was curious why you didn't originally use the printed head directly before. I kinda wondering if the quality wasn't quite what it needed to be, or it was too rough and couldn't be sanded down well, or some other issue. I'm still really interested to see how all this turns out. ~Sister Kyoya I just wanted the safety of knowing I could make a new copies relatively cheaply, and the possibility of selling the head as blanks. The original is quite rough but I'm going to smooth it with a Mr. Dissolved Putty as a filler, in combination with sanding. My SQ Hibiki I am putting up for adoption a SQ-Lab Ren head on flickr. Contact me for more details! Share this post Link to post Share on other sites
zakka Posted May 21, 2013 Why not just use an auto-body primer to refinish the surface of the head and make a mold for resin through the original? This seems much cheaper. On the plus side, if you were to use the original method with a resin master, silicone can be cut up and reused as filler for molds. I did this quite a bit, I just recently cast my first resin doll. Share this post Link to post Share on other sites
marisa_doll Posted May 28, 2013 Well guys, I tried painting the headcap and it came out, oddly enough, looking like I painted it! So I don't think painting is the option; unless I thin the paint loads and layer it up, but I can't get the surface smooth enough, the material just seems to be infinite layers when you try to sand it smooth. Casting seems to be the only way I'd be able to achieve a high quality finish but... well... I don't think I have the skills to cast it properly If anyone out there wants to try casting for me, give me a PM. Otherwise, I can't continue until I have a loooot more free time. Gotta have my priorities straight My SQ Hibiki I am putting up for adoption a SQ-Lab Ren head on flickr. Contact me for more details! Share this post Link to post Share on other sites
Lala Lolita Posted May 30, 2013 Wow this is super awesome! I'm sooo looking forward to seeing this finished. @blushingbjd Share this post Link to post Share on other sites
Shailara Posted May 30, 2013 Hmmm, I'm really wondering if sanding can't make it smooth... (\_/) ( ' .' ) ( uu) Share this post Link to post Share on other sites
misskale Posted June 3, 2013 This is a silly question but, couldn't you take a negative mould, press in paper/air dry clay and sand? Share this post Link to post Share on other sites