Jump to content

puxlavoix

Politely Nefarious

AnnaNeko

Xiongmao

Mandie

BeyondTime

DesertPhantom51

F-15

sunlightandtea

ateliervanilla

The Ecchizonans

Zoom Meetup

Tierparkzone

Frollywog

Veravey

MagicalRozen

Baldylox

belpita

Injection vs vinyl

Recommended Posts

Hoshiko_Blue
EEEE!

 

But I've been following Danny enough that when he says things like "not anytime soon" or "coming soon" I... have no idea what that means. I think the make your kits were coming soon a year ago

 

So true

I was pretty disappointed that he teased the diy kits so much and then he never released them and I really hope this won't be the case, but deep down I fear we'll be let down again.

Share this post


Link to post
Share on other sites
K-2

Another thing to consider, if this injection mold project goes well it may lead to actual production of Pocket Doll.


MVSig.jpg

Share this post


Link to post
Share on other sites
baldylox

I want him to make the Mannequin out of ABS so I can actually afford it. It would be so cool to have that big of a doll in the house if for nothing other than a conversation piece. But her being vinyl is gonna make her way more expensive than I want to dish out.

 

And K-2 might be onto something with the Pocket Doll idea. I know a lot of people who want one of those things....

 

 

 

Billy


I gave up counting the girls I own, they keep multiplying and won't stop.

Share this post


Link to post
Share on other sites
Kumi
EEEE!

 

But I've been following Danny enough that when he says things like "not anytime soon" or "coming soon" I... have no idea what that means. I think the make your kits were coming soon a year ago

 

So true

I was pretty disappointed that he teased the diy kits so much and then he never released them and I really hope this won't be the case, but deep down I fear we'll be let down again.

 

But last time it was supposed to be a vinyl DIY kit?

In the end, it is available - but only in store as a workshop... so yeah, a bit disappointing.

Share this post


Link to post
Share on other sites
senyac

The vinyl DIY kits have also been available in limited numbers at some events that Danny attends around the world , I have seen a few people post about it on FB , Danny has said the reason for the delay of the DIY kit on the website is because he is making a DIY manual to make sure people who buy them online know how to put them together , so they are still coming but when is any ones guess .

 

I am Hoping the Injection molded version also comes in a DIY kit but he has not said anything about that also read on Twitter someone mentioned to Danny that there is a rumour that the Injection molded doll would be 30000 yen and Danny replied "it is " .not sure if that's the sport bar set or sports bar & apparel set.

Share this post


Link to post
Share on other sites
kct

The DIY kits showed up at a recent local convention (Comic Fiesta 2017) for around 1,500 MYR (42k yen/380 USD due to weak exchange rates), and I have no idea where he held the workshop for that one.

 

Based on the current exchange rates, the so-called 30k yen for injection molded version would come at around 1,070 MYR (and 270 USD). That does not really sound much cheaper, but compared to the SmD sets being sold at a local Isetan which goes for 2,500 MYR, it was a pretty huge cut. I expect the price to go a little up if he opts to make it available at the same local Isetan, then again Malaysia is quite an important market for him in a symbolic manner.

Share this post


Link to post
Share on other sites
Hoshiko_Blue

30K Yen would be around 225/230 € if the exchange rate is good, which is a bit more than what I was expecting but is still half the price of a fullset vinyl SmD, so that's cool

 

Regarding the Diy kits, I meant that I was disappointed because he talked about an international release and then he postponed it twice, so yeah... I know they had been sold in special occasions, but I was kinda sad anyway...

 

Also, it would be soooooo great to have the pocket dolls made in whatever plastic he's using

They would be in Barbie size but cuter and also a hella lot cheaper than the 1/3 size, maybe in the same price range of pure neemos and such I imagine... They would be so perfect to make dioramas for

Share this post


Link to post
Share on other sites
sinclair
I want him to make the Mannequin out of ABS so I can actually afford it. It would be so cool to have that big of a doll in the house if for nothing other than a conversation piece. But her being vinyl is gonna make her way more expensive than I want to dish out.

 

I'm conflicted on this one. I'd love to have a girl this sized (Think, you might even be able to buy her clothes from Target!), but I think I'd rather have her out of vinyl as she'd be more huggable that way. But like you pointed out, then the cost will be extreme, which would make plastic a better option, but she wouldn't as fun to hug.

 

As for pocket dolls, those would be Barbie sized, or smaller? I've heard whispers of them, but don't really know anything about them. That size could be fun.

Share this post


Link to post
Share on other sites
twinage
also read on Twitter someone mentioned to Danny that there is a rumour that the Injection molded doll would be 30000 yen and Danny replied "it is " .not sure if that's the sport bar set or sports bar & apparel set.

 

If this injection ver. is below usd 200, will definitely adopt one

But if the difference isn't that big with diy vinyl kit, I rather chose the diy kit, considering the seamline, etc.

 

Imo, its weird though the price is a bit for something that can be produced like 10x more than vinyl a month. Like Danny should think lower price, bigger sale volume for the injection compared to the vinyl sale method which is higher price, smaller sale volume.

But then I don't know how expensive this 'softer' plastic material with anti-stain so maybe that what's make the price 30000 yen? Its kinda worth the price though if the injection kit come with wig, eyes, underwear, shirts and pants set.

 

Still, I'm hoping they make it more cheaper like 20000 yen-ish or even lower, since after all we build it by ourself like gundam or tamiya kit, all Danny staff need to do is just quality check and packaging. More simpler than the vinyl diy kit, where they still have to do more stuff (cutting the vinyl edge, etc.)

 

Or even best, there is nude option without clothes and no faceup to justify the low price ~

Share this post


Link to post
Share on other sites
Kumi

Well, to me the answer "it is" might as well mean just "yes, there is such rumour" but it desn't mean it's the truth. Hope so

Share this post


Link to post
Share on other sites
Panda_Dolliess

One on hand, taking into account the price of everything in the SmD brand, the SmD Cortext being priced at about $270 is a great deal. But on the other hand, I think it is safe to assume that we will be putting the cortext together ourselves and $270 is a bit high. I think for manual assembly, $200 should be the max. Also, what are the possibilities that the Cortex kits are going to come with blank face ups? I'm honestly surprised that Danny hasn't sold blank heads head. Face customizing is a HUGE part of this hobby.

Share this post


Link to post
Share on other sites
senyac
Well, to me the answer "it is" might as well mean just "yes, there is such rumour" but it desn't mean it's the truth. Hope so

I never thought of it that way lol

Share this post


Link to post
Share on other sites
senyac

I think the 30000 yen cost would be for a completed cortex with face up ,eyes .wig and some clothing .

He has not stated if a kit version will be released or not

Share this post


Link to post
Share on other sites
Kumi
I'm honestly surprised that Danny hasn't sold blank heads head. Face customizing is a HUGE part of this hobby.

Again - he did, but not quite (just like with the DIY kit...)

IIRC some time ago there was a possibility to order a blank Mirai type head when purchasing SmD female body.

But now the option is gone.

Share this post


Link to post
Share on other sites
Yumeiro

Blank heads are often offered in the discount section in the physical store. Sure, they are there due to some sort of flaw. They sellout quickly, so I guess putting heads online at this point (where smartdolls are getting more and more popular/known?) it would be hard to meet demand.

But I get the feeling he does not want much customization of his dolls...

Share this post


Link to post
Share on other sites
senyac

I got a blank head and body when they are for sale online , but I have yet got around to making a custom doll out if it

Share this post


Link to post
Share on other sites
Hoshiko_Blue

 

So, Danny posted this picture of a vinyl and a cortex Melody asking which one was which model and is it just me or the Melody on the right has a differend head shape?

It looks shorter, especially if you look at the distance between the eyes and the cheeks.

Maybe it's just the camera angle, be I'm kinda baffled :/

 

(Also, I'll learn how to link the image directly , I promise )

Share this post


Link to post
Share on other sites
cfx

The whole head looks smaller, but it could all be an optical illusion. The more visible cheek blush on the one could have an effect, and I think the wig is on further or further forward too.

 

The size could be slightly different. If the vinyl shrinks as it cools after being made (I don't know if it does or not BTW), the injection mold version likely does not. Whether that is accounted for or not it's probably an imprecise science.

Share this post


Link to post
Share on other sites
Hoshiko_Blue

You definitely have a point. Maybe the shape is a little different because the Cortex doesn't have an head cap, but a faceplate kinda thing, so perhaps this changes something.

Or maybe it is just a very bad picture

Share this post


Link to post
Share on other sites
Shailara

I'm going to say, the one with the jeans is the vinyl cause he probably had her already dressed to pose for the SmD protective stocking XD


(\_/)
( ' .' ) 
( uu)

Share this post


Link to post
Share on other sites
Youpla

wow it's impressive...

 

Left for the vinyl for me too, but honestly I'm not sure x)

Share this post


Link to post
Share on other sites
Hoshiko_Blue

Yeah, left for me too, for the clothes she's wearing though.

If they had been both naked or with the same outfit I wouldn't have been able to tell honestly, which is quite impressive.

 

(Edited because my phone doesn't know the difference between they and the)

Share this post


Link to post
Share on other sites
NeeP

I wish that Danny wouldn't hide the seam-lines with his creative dolly posing. I want to see them...


Niki P.

Vinyl brood at home: Len, Noah, Kenji, Rinto, Kiri, Eiji, Anais, Rin, ‘Red’, Lenka, Kai, Midoriya, Marc, ‘Sue’, Terra, Night, Frankie, Anna and Chitose.

Share this post


Link to post
Share on other sites
Shailara
I wish that Danny wouldn't hide the seam-lines with his creative dolly posing. I want to see them...

I imagine he will show them eventually, but he was trying to "prove a point" with this post... ? Hopefully... I also want to see how the parting lines will look, not that it will bother me if they're too obvious.


(\_/)
( ' .' ) 
( uu)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...

Important Information

I have read and agree to the Privacy Policy.